# # Yoshiro MIHIRA # sanpei@yy.cs.keio.ac.jp # Sotec WinBookPro DX4-100 DSTN # Intel DX4-100MHz # 3.05.19 # FreeBSD # 2.2-961014-SNAP # XFree86 3.1.2G-alpha # Chips & Technology 65545 # 1Mbytes # 800 x 600 # 10.1 inch # DSTN # # File generated by xf86config. # # Copyright (c) 1994 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/X11R6/lib/X11/fonts/local/" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # DontZoom EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the above line, and uncomment the # following line # Protocol "Xqueue" # AutoRepeat 500 5 AutoRepeat 50 60 # AutoRepeat 200 2 # Let the server do the NumLock processing. This should only be required # when using pre-R6 clients # ServerNumLock # Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock: # LeftAlt Meta # RightAlt ModeShift # RightCtl Compose # ScrollLock ModeLock XkbDisable EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer" Protocol "PS/2" Device "/dev/psm0" # Device "/dev/cuaa0" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 50 # Emulate3Buttons is an option for 2-button Microsoft mice Emulate3Buttons # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "My Monitor" VendorName "Unknown" ModelName "Unknown" # Bandwidth is in MHz unless units are specified # Bandwidth 25.2 # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. # HorizSync 31.5 - 40.6 # HorizSync 20.5 - 40.6 HorizSync 20.5 - 100.6 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. # VertRefresh 35-90 VertRefresh 35-120 # Modes can be specified in two formats. A compact one-line format, or # a multi-line format. # These two are equivalent # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace # Mode "1024x768i" # DotClock 45 # HTimings 1024 1048 1208 1264 # VTimings 768 776 784 817 # Flags "Interlace" # EndMode # This is a set of standard mode timings. Modes that are out of monitor spec # are automatically deleted by the server (provided the HorizSync and # VertRefresh lines are correct), so there's no immediate need to # delete mode timings (unless particular mode timings don't work on your # monitor). With these modes, the best standard mode that your monitor # and video card can support for a given resolution is automatically # used. # 640x480 @ 60 Hz, 31.5 kHz hsync Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 # 800x600 @ unknowin Modeline "1024x768" 40.09 1024 1030 1050 1365 768 769 770 808 Modeline "1024x768" 34.00 1024 1024 1024 1024 768 768 768 768 #Modeline "800x600" 40.09 800 0 0 0 600 0 0 0 Modeline "800x600" 40.09 800 840 864 992 600 601 605 626 #Modeline "800x600" 28 800 840 864 992 600 601 605 626 #Modeline "800x600" 40.09 800 841 864 992 600 601 605 626 #Modeline "800x600" 65.09 800 841 864 992 600 601 605 626 #Modeline "800x600" 40.05 800 800 800 800 600 600 600 600 Modeline "760x600" 40.09 760 760 760 760 600 600 600 600 Modeline "750x600" 40.09 750 750 750 750 600 600 600 600 Modeline "712x600" 40.09 712 712 712 712 600 600 600 600 Modeline "710x600" 40.09 710 710 710 710 600 600 600 600 Modeline "710x600" 40.09 710 710 710 710 600 600 600 600 Modeline "704x600" 40.09 704 704 704 704 600 600 600 600 # 320x200 @ unknowun for DOOM Modeline "320x200" 28.3 320 336 384 400 200 204 205 225 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Device configured by xf86config: Section "Device" Identifier "WinBookPro_DX4/100" Chipset "ct65545" VendorName "SOTEC" BoardName "WinBookPro_DX4/100_internal" Option "lcd_center" Option "fix_panel_size" # Option "use_modeline" # Option "no_stretch" # Option "STN" # Option "sw_cursor" # Clocks 25.18 28.32 40.09 40.09 40.09 40.09 40.09 40.09 VideoRam 1024 EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The Colour SVGA server Section "Screen" Driver "svga" # Use Device "Generic VGA" for Standard VGA 320x200x256 Device "WinBookPro_DX4/100" Monitor "My Monitor" Subsection "Display" Depth 8 # Omit the Modes line for the "Generic VGA" device Modes "800x600" "640x480" ViewPort 0 0 # Use Virtual 320 200 for Generic VGA EndSubsection EndSection