# File generated by xf86config. # # XF86Config for Mitsubishi apricot Note SX (M3423C-A3C0 Pentium-120) # XFree86 3.1.2D with Normal XF86_SVGA server (Chipset "ct65545") # # by Eriya Akasaka # # Copyright (c) 1995 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # DontZoom # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # DisableVidModeExtension # Uncomment this to enable the use of a non-local xvidtune client. # AllowNonLocalXvidtune # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # DisableModInDev # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # AllowNonLocalModInDev EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "Keyboard" Protocol "Standard" # when using XQUEUE, comment out the above line, and uncomment the # following line # Protocol "Xqueue" AutoRepeat 500 5 # Let the server do the NumLock processing. This should only be required # when using pre-R6 clients # ServerNumLock # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift, # RightCtl key to Compose, and ScrollLock key to ModeLock: # LeftAlt Meta # RightAlt ModeShift # RightCtl Compose # ScrollLock ModeLock # To disable the XKEYBOARD extension, uncomment XkbDisable. # XkbDisable # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, one way to get # a german layout on a 101 key keyboard is to modify the XkbSymbols # line: # XkbSymbols "symbols/us(pc101)+de" # If you have a US Microsoft Natural keyboard, you can use: # XkbSymbols "symbols/us(microsoft)" # XkbGeometry "geometry/microsoft" # These are the default XKB settings for XFree86 # Xkbkeycodes "keycodes/xfree86" # XkbTypes "types/default" # XkbCompat "compat/default" # XkbSymbols "symbols/us(pc101)" # XkbGeometry "geometry/pc" # To specify a keymap file entry to use, use XkbKeymap. This will # override the other Xkb parameters described above. # An example is: # XkbKeymap "xfree86(us_microsoft)" XkbKeymap "xfree86(jp106)" EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer" Protocol "PS/2" Device "/dev/psm0" # Device "/dev/ttyd0" # Device "/dev/cuaa0" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Protocol "Xqueue" # Baudrate and SampleRate are only for some Logitech mice # BaudRate 9600 # SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) Emulate3Buttons Emulate3Timeout 50 # ChordMiddle is an option for some 3-button Logitech mice # ChordMiddle EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "apricotNoteSX_10.4TFT_LCD" VendorName "Mitsubishi(apricot)" ModelName "apricotNoteSX" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. # HorizSync 31.5 HorizSync 30-64 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 35-100 # Modes can be specified in two formats. A compact one-line format, or # a multi-line format. # These two are equivalent # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace # Mode "1024x768i" # DotClock 45 # HTimings 1024 1048 1208 1264 # VTimings 768 776 784 817 # Flags "Interlace" # EndMode # This is a set of standard mode timings. Modes that are out of monitor spec # are automatically deleted by the server (provided the HorizSync and # VertRefresh lines are correct), so there's no immediate need to # delete mode timings (unless particular mode timings don't work on your # monitor). With these modes, the best standard mode that your monitor # and video card can support for a given resolution is automatically # used. # # WindowsNT3.51 Display Driver ( by Chips & Technologies ) tell me # as follows. # 640x480 (256) 30Hz # 640x480 (256) 60Hz # 640x480 (256) 72Hz # 640x480 (256) 75Hz # 800x600 (256) 56Hz # 800x600 (256) 60Hz # 800x600 (256) 72Hz # 800x600 (256) 75Hz # 1024x768 (256) 43Hz # 1024x768 (256) 60Hz # 640x480 (65536) 60Hz # 640x480 (16777216) Hardware Refresh # # 640x480 @ 60 Hz, 31.5 kHz hsync #Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 # 640x480 @ 60 Hz, 31.5 kHz hsync #Modeline "640x480" 25.175 640 648 688 784 480 488 491 521 # 640x480 @ ?? Hz, ??.? kHz hsync #Modeline "640x480" 28.322 640 664 760 800 480 491 493 525 # 640x480 @ ?? Hz, ??.? kHz hsync #Modeline "640x480" 28.322 640 648 688 784 480 488 491 521 # 640x480 @ 72 Hz, 44.6 kHz hsync #Modeline "640x480" 40.09 640 664 760 800 480 491 493 525 # 640x480 @ 72 Hz, 44.6 kHz hsync Modeline "640x480" 40.09 640 648 688 784 480 488 491 521 # 800x600 @ 60 Hz, 37.8 kHz hsync #Modeline "800x600" 40.09 800 840 864 992 600 601 605 626 # 800x600 @ 96.05 Hz ?, ??.? kHz hsync Modeline "800x600" 65.00 800 840 920 1064 600 600 602 636 # 1024x768 @ ?? Hz, ??.? kHz hsync #Modeline "1024x768" 40.09 1024 1030 1050 1365 768 769 770 808 # 1024x768 @ 60 Hz, 48.4 kHz hsync #Modeline "1024x768" 65.00 1024 1032 1176 1344 768 771 777 806 # 1024x768 @ 60 Hz, 48.4 kHz hsync #Modeline "1024x768" 65.00 1024 1032 1176 1344 768 771 777 806 -hsync -vsync # 1024x768 @ 60 Hz, 48.4 kHz hsync #Modeline "1024x768" 65.00 1024 1030 1050 1365 768 769 770 808 # 1024x768 @ 60 Hz, 48.4 kHz hsync Modeline "1024x768" 65.00 1024 1030 1050 1365 768 769 770 808 -hsync -vsync # 1024x768 @ 60 Hz, 48.4 kHz hsync #Modeline "1024x768" 65.00 1024 1064 1208 1344 768 771 777 806 # 1024x768 @ 60 Hz, 48.4 kHz hsync #Modeline "1024x768" 65.00 1024 1064 1208 1344 768 771 777 806 -hsync -vsync # 1024x768 @ 60 Hz, 48.4 kHz hsync #Modeline "1024x768" 65.00 1024 1080 1120 1344 768 771 777 806 # 1024x768 @ 60 Hz, 48.4 kHz hsync #Modeline "1024x768" 65.00 1024 1080 1120 1344 768 771 777 806 -hsync -vsync # 1024x768 @ 60 Hz, 48.4 kHz hsync #Modeline "1024x768" 65.00 1024 1152 1184 1360 768 766 772 806 # 1024x768 @ 60 Hz, 48.4 kHz hsync #Modeline "1024x768" 65.00 1024 1152 1184 1360 768 766 772 806 -hsync -vsync # 1152x900 @ 60 Hz, 48.4 kHz hsync #Modeline "1152x900" 65.00 1152 1152 1368 1400 900 912 929 945 -hsync -vsync # 1152x900 @ 60 Hz, 48.4 kHz hsync #Modeline "1152x900" 65.00 1152 1184 1344 1568 900 900 923 947 -hsync -vsync EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Generic VGA" VendorName "Mitsubishi(apricot)" BoardName "apricotNoteSX_internal" Chipset "generic" VideoRam 1024 # Clocks 25.175 28.322 40.09 40.09 40.09 40.09 40.09 40.09 Clocks 25.175 28.322 40.09 65.00 65.00 65.00 65.00 65.00 EndSection # Sample Device for accelerated server: # Section "Device" # Identifier "Actix GE32+ 2MB" # VendorName "Actix" # BoardName "GE32+" # Ramdac "ATT20C490" # Dacspeed 110 # Option "dac_8_bit" # Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0 # Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0 # EndSection # Sample Device for Hercules mono card: # Section "Device" # Identifier "Hercules mono" # EndSection # Device configured by xf86config: Section "Device" Identifier "C&T65545_on_apricotNoteSX" VendorName "Chips & Technologies" BoardName "CT65545_on_apricotNoteSX_internal" Chipset "ct65545" VideoRam 1024 # Insert Clocks lines here if appropriate # Clocks 25.175 28.322 # Clocks 25.175 28.322 40.09 40.09 40.09 40.09 40.09 40.09 Clocks 25.175 28.322 40.09 65.00 65.00 65.00 65.00 65.00 EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The Colour SVGA server Section "Screen" Driver "svga" # Device "Generic VGA" Device "C&T65545_on_apricotNoteSX" Monitor "apricotNoteSX_10.4TFT_LCD" Subsection "Display" Depth 8 # Modes "1152x900" "1024x768" "800x600" "640x480" Modes "1024x768" "800x600" "640x480" ViewPort 0 0 Virtual 1152 900 # Virtual 1024 768 EndSubsection Subsection "Display" Depth 16 Modes "800x600" "640x480" ViewPort 0 0 # Virtual 1152 900 # Virtual 1024 768 # Virtual 800 600 EndSubsection Subsection "Display" Depth 32 Modes "640x480" ViewPort 0 0 # Virtual 1152 900 # Virtual 1024 768 # Virtual 800 600 # Virtual 640 480 EndSubsection EndSection # The 16-color VGA server Section "Screen" Driver "vga16" Device "Generic VGA" Monitor "apricotNoteSX_10.4TFT_LCD" Subsection "Display" # Modes "1152x900" "1024x768" "800x600" "640x480" # Modes "1024x768" "800x600" "640x480" Modes "800x600" "640x480" ViewPort 0 0 # Virtual 1152 900 # Virtual 1024 768 # Virtual 800 600 EndSubsection EndSection # The Mono server Section "Screen" Driver "vga2" Device "Generic VGA" Monitor "apricotNoteSX_10.4TFT_LCD" Subsection "Display" # Modes "1152x900" "1024x768" "800x600" "640x480" # Modes "1024x768" "800x600" "640x480" Modes "800x600" "640x480" # Modes "640x480" ViewPort 0 0 # Virtual 1152 900 # Virtual 1024 768 # Virtual 800 600 EndSubsection EndSection # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64) Section "Screen" Driver "accel" Device "C&T65545_on_apricotNoteSX" Monitor "apricotNoteSX_10.4TFT_LCD" Subsection "Display" Depth 8 # Modes "1152x900" "1024x768" "800x600" "640x480" Modes "1024x768" "800x600" "640x480" ViewPort 0 0 # Virtual 1152 900 # Virtual 1024 768 EndSubsection Subsection "Display" Depth 16 Modes "800x600" "640x480" ViewPort 0 0 # Virtual 1152 900 # Virtual 1024 768 # Virtual 800 600 EndSubsection Subsection "Display" Depth 32 Modes "640x480" ViewPort 0 0 # Virtual 1152 900 # Virtual 1024 768 # Virtual 800 600 # Virtual 640 480 EndSubsection EndSection