#<ITEM>
#<DATE>    2000/01/15
#<NAME>    Yuichi KAWANISHI
#<ADDR>    yuichika@ca2.so-net.ne.jp
#<MCN>     Fujitsu FMV-BIBLO NE2/450L
#<CPU>     Intel Pentium III 450MHz
#<OS>      Linux
#<FOSV>    2.2.5 (LASER5 Linux6.0)
#<XFRV>    XFree86 3.3.6
#<XFRS>    XF86_SVGA
#<VCHIP>   ATI RAGE Mobolity
#<VRAM>    4Mbytes
#<VDEPTH>  24bpp/32bpp
#<RESOL>   1024 x 768
#<LCDSIZE> 14.1 inch
#<LCDTYPE> TFT
#<MISCJ>
#32bppも可能なのですが、動きがトロトロになるので、下記XF86Configでは
#24bppを指定しています。
#XF86_Mach64はどうしてもまともに表示できませんでしたので、XF86_SVGA
#を使いました。
#</MISCJ>
#</ITEM>
#

# File generated by XConfigurator.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath     "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

        FontPath        "/usr/X11R6.accX/lib/X11/AcceleratedX/fonts/misc"
    FontPath    "/usr/X11R6/lib/X11/fonts/misc"
        FontPath    "/usr/X11R6/lib/X11/fonts/kaname"
        FontPath    "/usr/X11R6/lib/X11/fonts/naga10"
        FontPath    "/usr/X11R6/lib/X11/fonts/75dpi"
        FontPath    "/usr/X11R6/lib/X11/fonts/100dpi"
 
#    FontPath   "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is 
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

    Protocol    "Standard"

    # when using XQUEUE, comment out the above line, and uncomment the
    # following line
    #Protocol   "Xqueue"

    AutoRepeat  500 5

    # Let the server do the NumLock processing.  This should only be 
    # required when using pre-R6 clients
    #ServerNumLock

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #Xleds      1 2 3

    #To set the LeftAlt to Meta, RightAlt key to ModeShift, 
    #RightCtl key to Compose, and ScrollLock key to ModeLock:

    LeftAlt        Meta
    RightAlt        Meta
   ScrollLock      Compose
   RightCtl        Control

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    XkbDisable

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    XkbModel    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    XkbModel    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    XkbLayout   "de"
# or:
#    XkbLayout   "de"
#    XkbVariant  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    XkbOptions  "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    XkbRules    "xfree86"
#    XkbModel    "pc101"
#    XkbLayout   "us"
#    XkbVariant  ""
#    XkbOptions  ""

   XkbKeycodes     "xfree86"
   XkbTypes        "default"
   XkbCompat       "default"
   XkbSymbols      "us(pc101)"
   XkbGeometry     "pc"
   XkbRules        "xfree86"
   XkbModel        "jp106"
    XkbLayout       "jp"
EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"
    Protocol    "IMPS/2"
    Device      "/dev/mouse"
    ZAxisMapping 4 5

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice

#    BaudRate   9600
#    SampleRate 150

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Emulate3Buttons
    Emulate3Timeout    50

# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle

EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "LCD Panel 1024x768"
    VendorName  "Fujitsu"
    ModelName   "FMV-BIBLO NE2/450L"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   30.0-70.0

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 40-90

# Modes can be specified in two formats.  A compact one-line format, or
# a multi-line format.

# These two are equivalent

#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace

#    Mode "1024x768i"
#        DotClock       45
#        HTimings       1024 1048 1208 1264
#        VTimings       768 776 784 817
#        Flags          "Interlace"
#    EndMode

# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.

# for BIBLO VESA VGA16
Modeline "640x480"    28.32 640 656 752 800 480 488 490 529 -HSync -VSync

Modeline "1024x768"    65.14 1024 1056 1184 1312 768 772 776 792 -HSync -VSync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"
    Identifier  "VGA16"
    VendorName  "ATI"
    BoardName   "Mobility P"
        Chipset         "ATI Mach64"
    VideoRam    4096
    # Insert Clocks lines here if appropriate
EndSection

Section "Device"
    Identifier  "Generic VGA"
    VendorName  "ATI"
    BoardName   "Mobility"
    Chipset             "Mach64"

    VideoRam 4096

#    Clocks   25.2 28.3

EndSection

# Device configured by Xconfigurator:

Section "Device"
    Identifier  "My Video Card"
    VendorName  "Unknown"
    BoardName   "Unknown"
    #VideoRam    4096
    # Insert Clocks lines here if appropriate
EndSection

Section "Device"
    Identifier  "Mach64"
    VendorName  "ATI"
    BoardName   "Mobility P"
        Chipset         "Mach64"
    VideoRam    4096
    # Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# The Colour SVGA server

Section "Screen"
    Driver      "vga16"
    Device      "VGA16"
    Monitor     "LCD Panel 1024x768"
    Subsection "Display"
        Depth       16
        Modes       "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

Section "Screen"
    Driver      "svga"
    Device      "Generic VGA"
    #Device      "My Video Card"
    Monitor     "LCD Panel 1024x768"
    Subsection "Display"
        Depth       24
        Modes       "1024x768"
        #Modes       (null)
        ViewPort    0 0
    EndSubsection
EndSection

# The 16-color VGA server

Section "Screen"
    Driver      "vga16"
    Device      "Generic VGA"
    Monitor     "LCD Panel 1024x768"
    Subsection "Display"
        Modes       "640x480" "800x600"
        ViewPort    0 0
    EndSubsection
EndSection

# The Mono server

Section "Screen"
    Driver      "vga2"
    Device      "Generic VGA"
    Monitor     "LCD Panel 1024x768"
    Subsection "Display"
        Modes       "640x480" "800x600"
        ViewPort    0 0
    EndSubsection
EndSection

# The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, Mach64
# I128, and S3V)
Section "Screen"
    Driver      "accel"
    Device      "Mach64"
    Monitor     "LCD Panel 1024x768"
    Subsection "Display"
        Depth       32
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection