#<ITEM>
#<DATE>    2000/03/11
#<NAME>    Eric Backus
#<ADDR>    ericjb@wolfenet.com
#<MCN>     Dell Inspiron 5000e UXGA
#<CPU>     Intel Pentium III 800MHz/650MHz Speedstep
#<BIOS>    A05
#<OS>      Linux
#<OSV>     2.4.0
#<XFRV>    XFree86 4.0.2
#<XFRS>    XFree86
#<VCHIP>   ATI Rage 128 Mobility LF (AGP)
#<VBUS>    AGP
#<VRAM>    16 MB
#<VDEPTH>  16bpp (also supports 8bpp, 15bpp, 24bpp)
#<RESOL>   1600x1200
#<LCDSIZE> 15 inch
#<LCDTYPE> TFT
#<MISC>
#This XF86Config file supports changing resolution on the fly, from
#the native 1600x1200 to 1280x1024, 1024x768, 800x600, 640x480, and
#640x400.  With Linux 2.4.0 and XFree86 4.0.2, you can get hardware 3D
#accleration on this machine, but to get this working properly you
#must ensure that the agpgart module is loaded before X tries to load
#the r128 module.  This XF86Config file supports simultaneous input
#from both a USB mouse and built-in touchpad.
#</MISC>
#</ITEM>
#
#----------------------------------------------------------------------


# File generated by XFdrake.  (Then modified by hand.)

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

    Identifier "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat"  "225 35"

    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc104"
    Option "XkbLayout" "en_US"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

    Identifier "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "PS/2"
    Option "Device"      "/dev/psaux"
    Option "Emulate3Buttons"
    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

Section "InputDevice"
    Identifier  "Mouse2"
    Driver      "mouse"
    Option      "Device"       "/dev/input/mice"
    Option      "Protocol"     "IMPS/2"
    Option      "ZAxisMapping" "4 5"
    Option      "Buttons"      "5"
EndSection



Section "Module"

# This loads the DBE extension module.

    Load	"dbe"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    SubSection	"extmod"
	#Option	"omit xfree86-dga"
    EndSubSection

# This loads the Type1 and FreeType font modules

    Load	"type1"
    Load	"freetype"

# This was taken from Jeff Lessem's config file, and from the stock
# RedHat 7 config file.  I don't know what all of them do, but at
# least some of them (dri? GLcore?) appear to be necessary to get 3D
# speedups working.
    Load	"speedo"
    Load	"extmod"
    Load	"xie"
    Load	"pex5"
    Load	"glx"
    Load	"dri"
    Load	"GLcore"
    Load	"record"
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier "Generic|Generic LCD Panel 1600x1200"
    VendorName "Generic"
    ModelName  "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  26-94


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 55-120

    DisplaySize 304 228

EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier "Generic VGA"
    Driver     "vga"
EndSection

Section "Device"
    Identifier  "ATI Rage 128 Mobility"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "r128"
#    VideoRam    16384
    # Clock lines


    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"

    # The following are accepted by the driver, but don't appear to do
    # anything useful.
    # Option "PanelWidth" "304"
    # Option "PanelHeight" "228"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
    Identifier "screen1"
    Device      "ATI Rage 128 Mobility"
    Monitor     "Generic|Generic LCD Panel 1600x1200"
    DefaultColorDepth 16
    Subsection "Display"
        Depth       8
        Modes       "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" 
"640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       15
        Modes       "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" 
"640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" 
"640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1600x1200"
        ViewPort    0 0
    EndSubsection
EndSection


Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Mouse2" "SendCoreEvents"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection


Section "DRI"
    Mode 0666
EndSection